TIP TREATING fishing reel

Prepare tools - tools as follows:

1. Water (To wash the outside of the reel)
2. cloth towels (to dry the washing water remaining reel)
3. Lubricantion (grease and oil, to grease I used to wear when Relix reel lube oil aja use sewing machine oil)
4. if necessary
5. Screwdriver

The ways are:

1. Dampen aja by sweeping the outside of reel with warm water, not soaked. After it was dry with a towel or cloth to dry.
2. Do not remove the spool and soak in water, because water will get into the mechanism of drag and drag it will create an abnormal way. washing time actually tighten the reel drag so that water does not go into the mechanism of drag. Drag on the reel there are two types, drag and drag wet dry, dry drag washers usually only 2-3 real seeds and all the washers must be completely dry of any kind. if more than three metal washers usually drag pake wet, it means there is oil on the washers. This should not be mistaken ... given the dry drag down oil will be unable to brake drag, drag wet ga given oil, the drag will be locked if the hard little problem. This drag if exposed to water so it is not ungodly way.
3. Lubrication reels, there are two types of grease as lubricant oil, grease that fat, thick like butter, oil ... liquid form. Which parts of the reel is used where the use of oil and grease? All bearings used oil rather than grease, wear all the gear grease not oil. Especially for a roller bearing mechanism Oneway never once let alone excessive grease, roller bearings have been indicted by a small-very small, approximately one fifth of the diameter of a ballpoint with high flexibility, if each is subject to grease, like jams and make rollernya not want to play, in sum Oneway roller prefer not to work and reel can rotate backwards. Do not give too much grease in the area of pinion gear teeth ato pineapple, not so smooth reel drag is not even so erratic. Give grease sparingly. Love the attention at line roller, the roller mechanism in a string of bail arm, people miss out if there is a bearingnya too.
4. Every few times a trip, always open the release mechanism with Oneway bearing rotor first, this part is often collected in salt, although the reel is always washed out of time fishing.
5. Tips for reel overhaul, dismantle all parts of the reel without exception. Remember to record the position of any part or place in plastic containers for each part. Do not forget the position will not be reversed again become troublesome. Usually there reel in box exploded diagram (picture reel section follows parts of the serial numbers), use this diagram. Wash all parts of the reel with WD40, use a small paintbrush for the hard part. Remove all traces of grease is usually brown and black. If all is clean, reinstall and give it new grease and oil your reel ... would have been much more refined sound .... guaranteed!
6. In stella, if rotorn opened, there was a circle of rubber shaped like a seal crem color, this is actually not a seal, but serves to hold the rotor when bail arm is opened, try to feel, if bail arm is opened the rotor would be a drag way, because there is a kind of hook that would stuck in this circle of rubber like seal. This should not be washed disposable rubber WD40, can not expand uncontrollably ......
7. To ultegra up until the stella, do not remove the worm shaft with the opening bracket behind the reel ... this mechanism can be washed pake WD40 and brush without having to be dismantled ... if you dismantle the worm shaft ... you will find it hard put it back ... this is really pain.
8. if you do not dare open fishing equipment brought to the nearest technician, or buy a new one so as not to disturb your holiday activities
   
   
   

Trick Top Water Popping....!!!

here are some ways to use top water poppers,

• when fish are aggressive or attack with harsh, use the technique of "skitter" way is to roll up (retrieve) with a constant velocity while moving the tip of a fishing pole (rod) such as pumping. In this way intended to create ripples on the surface to mimic the behavior of small fish (baitfish) that are vague or wounded.
  
• Another way is to lure popping. How this is done by making the movement a little boost hard (sharp jerking) continues to allow a pause kenur rolling. This technique will produce water splashes
• This technique is called twitching. Way he cast his lure, set aside for a moment until the water is calm and do twitch movements such as the pumped / moved to the right and left when kenurnya not too tight rolled up will produce effects lurenya move to the right and left.
• Keep your rod tip to keep it below if you want to produce a more subtle movement. To create a more coarse spray / noisy and aggressive when raising the rod tip kenur half rolled up and down the tip rod as well as time and a half playing for the strings to keep the lure remains on the surface of the water.

Hopefully these tips useful. Please add if there is a shortage. Happy fishing ..

Common Mistakes You Do In Fishing

Many of us make mistakes - mistakes while fishing, which led to our fishing destination for the target fish failed. The first thing you do after your fishing is an evaluation, whether your fishing technique is correct, and if everything went according to the good. Whether you are fishing in the wild or in the fishing pond, all of course requires evaluation techniques, you might make a few mistakes in fishing as follows:

• One of the bait. Bait you are using does not match what the fish liked. Usually a lot of people bring a lot of bait for fishing in a pond, or have been concocting at home, it helps you to find leaks of information about your target will be, what kind of a mascot, the fish come from areas where, sometimes determine the origin of the fish we'll get information anything valuable in the food consumption of fish in the area of origin. For the fishing in public waters bring your bait in accordance with your target, for example you search for tilapia fish, then you bring moss which is a favorite bait fish, with a dip in the stew of snails such as the bait is a favorite of tilapia.
• One hour or time, the fish has time in terms of eating habits, type of catfish, eel and catfish have active eating at night, another example of tilapia and tilapia are active during the day. By choosing to eat the right time, then the fishing process can produce more than you think. Maybe it's good you learn the nature and habits of eating fish from the book and also the biological properties of fish.
• Location of fishing conditions less supportive. The cause is too much water plant. Fish prefer water conditions there a bit of water plants and water conditions are quite clear. The best condition is that if the color is green because the water content of algae or moss, but not too muddy. The fish also did not like mud, mud that is too much content causing oxygen content is reduced and the fish become inactive in search of food. Fish will tend to be in the pond and would not eat. Study the water conditions before you fishing, good if you like fishing in a pond or fishing in open water.

Fishing is not a complicated job, with little evaluation of the results of your fishing of course, you will get your target fish with maximum results.